Frequently Asked Questions

Other Languages: Dansk Deutsch Ελληνικά English Español Suomi Filipino Français Indonesian Italiano Japanese Korean Malay Bokmål Nederlands Polski Português - Brasil Português - Portugal Русский Thai Türkçe Українська Vietnamese Chinese Taiwan Chinese

Hantera DNS För Dina Domännamn

Print this Article
Last Updated: February 17, 2015 7:47 AM

Using our DNS Manager, you can use the Zone File Editor to add, edit, and delete zone file records for your domain names registered with us or registered elsewhere and using our DNS (Off-site DNS).

OBS: Du kan bara använda Zonfilsredigeraren för att hantera DNS för domännamn som använder våra namnservrar. Med andra ord, om ditt domännamn är registrerat här, måste det vara parkerat, vidarebefordrat, eller upprätthållas av oss. Om det är registrerat någon annanstans, måste det upprätthållas av oss eller använda vår off-site-DNS. Om ditt domännamn använder tredjepartsnamnservrar måste du kontakta tredjeparten för att uppdatera din DNS.

Det kan ta upp till 48 timmar innan alla DNS-ändringar som du gör återspeglas på internet.

Premium DNS Users: Instead of these instructions, see Managing Premium DNS for Your Domain Names.

För mer information om off-site-DNS, se Managing Domain Names with Off-site DNS.

For more information about working with zone files and records, see Domain Name FAQ.

Accessing the Zone File

For Standard DNS accounts, you can access the Zone File from the Domain Details of your domain names are registered here and using our nameservers (not including CashParking® and Quick Content).

Om dina domännamn är registrerade någon annanstans och använder vår off-site-DNS, använd instruktionerna i Managing Domain Names with Off-site DNS för att komma åt Zonfilsredigeraren.

To Access the Zone File

  1. Logga in på Kontohanteraren.
  2. Bredvid Domäner klickar du på Starta.
  3. Klicka på det domännamn du vill använda.
  4. Click the DNS Zone File tab at the top.

Click on the corresponding link for the type of Zone File you would like to add or edit:

Lägga till eller redigera A-poster

En A (värd) post ansluter ditt domännamn till din IP-adress. A-poster låter användare ange ditt domännamn i en webbläsare för att komma åt din webbplats. De är den vanligaste typen av zonpost.

Att lägga till en post

  1. In the DNS Zone File, click Add Record.
  2. Gå till listan Posttyp och markera A (värd).
  3. Fyll i följande fält:
    • Host Name — Enter the host name the A record links to. Type @ to point the record directly to your domain name, including the www.
    • Points to IP Address — Enter the IP address your domain name uses for this host record.
    • TTL — Select how long the server should cache the information.
  4. Click Save, and then click Save Changes. The new A record displays in the A (Host) section.

Att redigera en A-post

  1. In the A (Host) section, next to the record you want to change, click Edit Record.
  2. Redigera något av följande fält:
    • Host — Enter the host name the A record links to. Type @ to map the record directly to your domain name, including the www.
    • Points to — Enter the IP address your domain name uses for this host record.
    • TTL — Select how long the server should cache the information.
  3. Klicka på Spara och klicka sedan på Spara ändringar.

Lägga till eller ändra CNAME-poster

En CNAME (Alias) -post hänvisar till en A-post (värd). Du kan skapa flera olika CNAME-poster och hänvisa dem till en A-post. De vanligaste CNAME-posterna är underdomänerna www och ftp.

CNAME-poster gör dina DNS-data enklare att hantera. Om du ändrar IP-adressen för en A-post följer alla CNAME-poster som pekar på den A-posten automatiskt den nya IP-adressen. Den alternativa lösningen -- flera A-poster -- är inte lika enkel som att använda CNAME-poster.

Du kan klicka på Återställ till grundinställningar i zonfilredigerarens CNAME (Alias)-sektion för att återställa de grundinställda MX-posterna för ditt domännamn.

Lägga till en CNAME-post

  1. In the DNS Zone File, click Add Record.
  2. Från Posttyp-listan, välj CNAME (Alias).
  3. Fyll i följande fält:
    • Enter an Alias Name — Enter the subdomain name for the alias assignment. For example, type www.
    • Points to Host Name — Enter the host name you want the alias to point to. For example, type @ to map the alias directly to your domain name.
    • TTL — Select how long the server should cache the information.
  4. Click Save, and then click Save Changes. The new CNAME record displays in the CNAME (Alias) section.

Att redigera en CNAME-post

  1. In the CNAME (Alias) section, next to the record you want to change, click Edit Record.
  2. Redigera något av följande fält:
    • Host — Enter the subdomain name for the alias assignment. For example, type www.
    • Points to — Enter the host name you want the alias to point to. For example, type @ to map the alias directly to your domain name.
    • TTL — Select how long the server should cache the information.
  3. Klicka på Spara och klicka sedan på Spara ändringar.

Lägga till eller ändra MX-poster

E-postservrar skickar och tar emot e-post på internet. MX-poster (Mail Exchanger) specificierar och prioriterar de ingående e-postservrarna som tar emot e-post skickat till ditt domännamn. Man behöver oftast inte ändra sina MX-poster. Ibland måste man uppdatera dem om man har en webbsida på ett nätverk men har e-post på ett annat.

Normally, you have multiple MX records assigned to your domain name, which can prevent lost email messages during an outage. Each MX record has a priority, or a number to designate the order in which your domain name's incoming mail servers receive your email messages. The MX record with the lowest number is the first, or primary, mail server to which outgoing mail servers attempt to deliver your email messages.

Till exempel, om du har MX0 och MX10, så är MX0 din primära e-postserver och MX10 är en alternativ e-postserver. Om din primära e-postserver inte är tillgänglig kommer den alternativa e-postservern att spara din e-post tills den primära servern är online igen.

Du kan klicka på Återställ standardvärden i delen MX (Mail Exchanger) i zonfilsredigeraren för att återställa standard-MX-posterna för ditt domännamn.

OBSERVERA: Du kan inte konfigurera ditt domännamn så att det använder fler än en e-posttjänst åt gången. Om du har ett e-postkonto genom en annan e-postleverantör och ändrar din MX-post så att den pekar på våra e-postservrar, kommer du inte att ha åtkomst till ditt e-postkonto.

Att lägga till en MX-post

  1. In the DNS Zone File, click Add Record.
  2. Från Posttyp-listan, välj MX (Mail Exchanger).
  3. Fyll i följande fält:
    • Priority — Select the priority you want to assign to the mail server.
    • Host Name — Enter the domain name or subdomain for the MX record. For example, type @ to map the record directly to your domain name, or enter the subdomain of your host name, such as www or ftp.
    • Enter Goes To Address — Enter the mail server's address, such as smtp.secureserver.net.
    • TTL — Select how long the server should cache the information.
  4. Click Save, and then click Save Changes. The new MX records displays in the MX (Mail Exchanger) section.

Så redigerar du en MX-post

  1. In the MX (Mail Exchanger) section, next to the record you want to change, click Edit Record.
  2. Redigera något av följande fält:
    • Priority — Select the priority you want to assign to the mail server.
    • Host — Enter the domain name or subdomain for the MX record. For example, type @ to map the record directly to your domain name, or enter the subdomain of your host name, such as www or ftp.
    • Points to — Enter the mail server's address, such as smtp.secureserver.net.
    • TTL — Select how long the server should cache the information.
  3. Klicka på Spara och klicka sedan på Spara ändringar.

Lägga till eller redigera TXT-poster

En TXT (Text) post är en informativ post som du kan använda för att tillhandahålla ytterligare information om den namngivna tjänsten. Du kan använda en TXT-post för att inkludera anteckningar om en värd, eller så kan du formattera den så att den tillhandahåller teknisk information till servrar. Med användning av formatet namn=värde, där tecknen före det första = tecknet utgör namnet och allting efter det första = tecknet är värdet, kan du ange upp till 255 tecken.

OBS: Du kan skapa flera TXT-poster, men deras sammanlagda längd får inte överstiga 512 tecken.

Lägga till en TXT-post

  1. In the DNS Zone File, click Add Record.
  2. Från listan med Protokolltyper väljer du TXT (text).
  3. Fyll i följande fält:
    • TXT Name — Enter the host name for the TXT record. For example, type @ to map the record directly to your domain name, or enter the subdomain of your host name, such as www or ftp. (This field is labeled Host in the TXT (Text) section of the Zone File Editor.)
    • TXT Value — Enter the value you want to assign to the record.
    • TTL — Select how long the server should cache the information.
  4. Click Save, and then click Save Changes. The TXT record displays in the TXT (Text) section.

Att redigera en TXT-post

  1. In the TXT (Text) section, next to the record you want to change, click Edit Record.
  2. Redigera något av följande fält:
    • Host — Enter the host name for the TXT record. For example, type @ to map the record directly to your domain name, or enter the subdomain of your host name, such as www or ftp.
    • TXT Value — Enter the value you want to assign to the record.
    • TTL — Select how long the server should cache the information.
  3. Klicka på Spara och klicka sedan på Spara ändringar.

Adding or Editing SPF Records

En Sender Policy Framework (SPF) post är en typ av TXT-post som låter dig uttryckligen definiera vilka utgående mailservrar som kan skicka e-post från ditt domännamn. Du kan använda dem för att förhindra skräppost. När inkommande mailservrar tar emot e-postmeddelanden från ditt domännamn, jämför de SPF-posten med uppgifterna i den utgående mailservern. Om uppgifterna inte stämmer överens, identifieras e-postmeddelandet som ej auktoriserat.

To add an SPF record, you need to use our classic DNS Manager.

Så lägger du till en SPF-post

  1. In the DNS Zone File, click Use classic DNS Mananger.
  2. Klicka på Lägg till ny post.
  3. Gå till listan Posttyp och markera SPF (Sender Policy Framework).
  4. För Det här domänet skickar e-post via, välj ett av följande alternativ:
    • Us only — Sends email messages from our mail servers only.
    • Us and an ISP — Sends email messages via our mail servers and your ISP's mail servers.
    • An ISP or other mail provider — Sends email from your ISP's mail servers or from another mail provider.
    • No email is sent from this domain — Does not send email from this domain name.
  5. Från Ingående-fliken, gör en eller fler av följande saker:
    • All Inbound Servers May Send Mail — Select this option to allow any incoming mail servers to send email messages. Most inbound mail servers send outbound NDRs (non-delivery receipts).
    • Select individual servers — Select the incoming mail servers allowed to receive email messages.
    • Enter Additional MX Addresses (one per line) — (Optional) Enter additional incoming MX (Mail Exchanger) addresses allowed to receive email messages.
    • Exclude all hosts not specified here (-all) — (Optional) Select this option to block any incoming mail servers not specified here from receiving email messages.
  6. Från Utgående-fliken, gör en eller flera av följande saker:
    • All Addresses in A Records — Select this option if the IP addresses listed in your A records for the domain name are also outbound mail servers.
    • Enter Additional A Addresses (one per line) — (Optional) Enter additional outgoing A addresses allowed to send email messages.
    • Exclude all hosts not specified here (-all) — (Optional) Select this option to block any outgoing mail servers not specified here from sending email messages.
  7. Gå till PTR-fliken och gör en eller flera av följande saker:
    • PTR (DNS Lookup) — Select this option to allow all servers ending with your domain name to send email messages.
    • Enter Additional PTR Addresses (one per line) — (Optional) Enter additional PTR addresses allowed to send email messages.
    • Exclude all hosts not specified here (-all) — (Optional) Select this option to block any outgoing mail servers not specified here from sending email messages.

      OBSERVERA: PTR syftar på omvända DNS-poster. Om PTR inkluderas i en SPF-post talar det om för den mottagande SMTP-servern att en omvänd DNS-sökning ska utföras på den sändande serverns IP-adress och sedan förvänta sig en match som svar. Om du anger ytterligare PTR-adresser betraktas svar som slutar med de domännamn som giltiga matchningar.

  8. Gå till fliken Utlagd och gör en eller flera av följande saker:
    • Enter Outsourced Domains (one per line) — If an ISP or other third-party server sends email messages from your domain name, enter the third-party domain names you are using.
    • Exclude all hosts not specified here (-all) — (Optional) Select this option to block any outgoing mail servers not specified here from sending email messages.
  9. Klicka på Spara zonfilen och klicka sedan på OK. SPF-posten visas i TXT (Text) delen.

Så redigerar du en SPF-post

  1. Gå till zonfilsredigeraren för domännamnet du vill uppdatera.
  2. In the TXT (Text) section, next to the record you want to change, click Edit Record.
  3. Redigera något av följande fält:
    • Host — Enter the host name for the TXT record. For example, type @ to map the record directly to your domain name, or enter the subdomain of your host name, such as www or ftp.
    • TXT Value — Enter the value you want to assign to the record.
    • TTL — Select how long the server should cache the information.
  4. Klicka på Spara zonfil och klicka sedan på OK.

Lägga till eller redigera SRV-poster

SRV (Service) poster är resursposter som används för att identifiera datorer är värd för specifika tjänster, t.ex. FTP. Exempelvis kan en klient begära att SRV-posten ska hitta värdnamnet som tillhandahåller tjänsten för ett specifikt domännamn. Tjänsten kan användas på det domännamnet eller så kan ett annat namn anropa den.

Att lägga till en SRV-post

  1. In the DNS Zone File, click Add Record.
  2. Gå till listan Posttyp, markera SRV (Service).
  3. Fyll i följande fält:
    • Service — Enter the service name of this SRV record. The name should begin with an underscore, such as _ldap, _ftp, or _smtp.
    • Protocol — Enter the protocol the service uses. The name should begin with an underscore, such as _tcp or _udp.
    • Name — Enter the host name or domain name the SRV links to, such as server1. If you want to link the record to your domain name, type @.
    • Priority — Select the priority for the SRV record. For multiple records that have the same Name and Service, clients use the priority number to determine which Target to contact first.
    • Weight — Select the weight of the SRV record. For multiple records that have the same Name, Service, and Priority, clients use the weight number to determine which Target to contact first.
    • Port — Enter the port number for the service, such as 80 or 21.
    • Target — Enter the host name of the server that provides the service this record describes. For example, type ftp.coolexample.com. This host name must be an A or AAAA type in the DNS zone for the domain name that provides the service.
  4. Click Save, and then click Save Changes. The SRV record displays in the SRV (Service) section.

Att redigera en SRV-post

  1. In the SRV (Service) section, next to the record you want to change, click Edit Record.
  2. Redigera något av följande fält:
    • Service — Enter the service name of this SRV record. The name should begin with an underscore, such as _ldap, _ftp, or _smtp.
    • Protocol — Enter the protocol the service uses. The name should begin with an underscore, such as _tcp or _udp.
    • Name — Enter the host name or domain name the SRV links to, such as server1. If you want to link the record to your domain name, type @.
    • Priority — Select the priority for the SRV record. For multiple records that have the same Name and Service, clients use the priority number to determine which Target to contact first.
    • Weight — Select the weight of the SRV record. For multiple records that have the same Name, Service, and Priority, clients use the weight number to determine which Target to contact first.
    • Port — Enter the port number for the service, such as 80 or 21.
    • Target — Enter the host name of the server that provides the service this record describes. For example, type ftp.coolexample.com. This host name must be an A or AAAA type in the DNS zone for the domain name that provides the service.
  3. Klicka på Spara och klicka sedan på Spara ändringar.

Lägga till eller ändra AAAA-poster

AAAA-poster lagrar 128-bitars Internet Protocol version 6 (IPv6) adresser som inte passar standard A-postformatet. Exempelvis är 2001:0db8::85a3:0000:0000:6a2e:0371:7234 en giltig 128-bit/IPv6 adress. Den mappar värdnamnet till en adress som är förknippad med ett domännamn och specificerar att AAAA-poster måste bearbetas.

Att lägga till en AAAA-post

  1. In the DNS Zone File, click Add Record.
  2. Gå till listan Posttyp och markera AAAA.
  3. Fyll i följande fält:
    • Host Name — Enter the host name or domain name that links to this AAAA record.
    • Points to IPv6 Address — Enter the 128-bit address.
    • TTL — Select how long the server should cache the information.
  4. Click Save, and then click Save Changes. The AAAA record displays in the AAAA (IPv6) section.

Att redigera en AAAA-post

  1. In the AAAA (IPv6) section, next to the record you want to change, click Edit Record.
  2. Redigera något av följande fält:
    • Host — Enter the host name or domain name that links to this AAAA record.
    • Points to — Enter the 128-bit address.
    • TTL — Select how long the server should cache the information.
  3. Klicka på Spara och klicka sedan på Spara ändringar.

Lägga till eller ändra NS-poster

NS (Namnserver) -poster ger tredjepartsnamnservrar tillåtelse att hantera ditt underdomäns DNS. I varje zonfil måste det finnas minst två NS-poster. När du lägger till en NS-post för en underdomän kommer din underdomän och ditt domännamn att ha olika zonfiler på tredjepartsnamnservern.

Om ditt domännamn är registrerat hos oss, använd följande instruktioner för att uppdatera dess namnservrar beroende på hur du använder eller upprätthåller domännamnet.

OBS: Efter att du lagt till NS-poster fortsätter din DNS att visas i vårt system i upp till 48 timmar. Efter att din uppdatering har överförts kommer du inte längre ha tillgång till din DNS i vårt system. Du måste kontakta din tredjepartsleverantör för att installera en motsvarande zonfil för domännamnet för att göra framtida ändring på din DNS.

Att lägga till en NS-post

  1. In the DNS Zone File, click Add Record.
  2. Gå till listan Posttyp och markera NS (namnserver).
  3. Fyll i följande fält:
    • Host Name — Enter the subdomain you want to add a NS record for.
    • Points to Host Name — Enter the nameserver you want to use to manage your subdomain.
    • TTL — Select how long the server should cache the information.
  4. Click Save, and then click Save Changes. The NS record displays in the NS (Name Server) section.

Redigera en NS-post

  1. In the NS (Name Server) section, next to the record you want to change, click Edit Record.
  2. Redigera något av följande fält:
    • Host — Enter the subdomain you want to add the NS record for.
    • Points to — Enter the nameserver you want to use to manage your subdomain.
    • TTL — Select how long the server should cache the information.
  3. Klicka på Spara och klicka sedan på Spara ändringar.

Filtrera poster

You can filter DNS records for your zone file. For example, you can use the filter to view only your A records.

Att filtrera en post

  1. Go to the DNS Zone File tab for the domain name you want to update.
  2. I Filter-sektionen, välj de zonposter som du vill visa.

Radera poster

I Zonfilredigeraren kan du ta bort DNS-poster som du inte längre vill använda.

Att radera en post

  1. Go to the DNS Zone File tab for the domain name you want to update.
  2. Välj den post som du vill radera, klicka sedan på Radera.
  3. Click Save Changes.

Kontrollera dina poster

I Zonfilsredigeraren kan du kontrollera att ditt domännamns zonfilsposter är korrekta. Resultatet visas bredvid zonfilsposten. Om en av posterna inte är korrekta kan du rätta till den.

Funktionen Kontrollera zonposter utför valideringskontroller på postnivå. Den tittar särskilt på dina A-poster och ser till att dina domännamn, underdomäner och vidareskickade domännamn har giltiga IP-adresser. Om du exempelvis skapar en underdomän med en saknad IP-adress, visar fönstret Zonfilsfel fel i kolumnen Status och tillhandahåller ett Fixa-alternativ.

Så kontrollerar du din domännamns zonfilposter

  1. Click the Edit option to get to the Zone File Editor.
  2. From the More icon, click Check Zone Records.

    OBS: Om dina poster inte innehåller några fel kommer ett Lyckades-meddelande visas. Om en post innehåller fel, klicka på Rätta till för att lösa problemet.

  3. Review the zone file record results, and then click Close.