Cisco PIX 501 Firewall Preconfigured Access Rules
Print this Article
Comment on this Article
Last Updated:
September 17, 2007 10:08 AM
Your Cisco PIX 501 hardware firewall comes set up with preconfigured access rules. By default, all outbound traffic is allowed.
Also by default, all inbound traffic is denied, except for the following open ports:
- 20 (FTP)
- 21 (FTP)
- 22 (SSH)
- 42 (DNS Extra: TCP and UDP)
- 53 (DNS)
- 80 (HTTP)
- 110 (POP3)
- 443 (HTTPS)
- 465 (SMTPS)
- 587 (SMTP/TLS)
- 995 (POP3S)
- 3389 (Remote Desktop)
- 8443 (Plesk)
- 9999 (Simple Control Panel)
To modify Cisco PIX 501 hardware firewall access rules, see Configuring Cisco PIX 501 Firewall Access Rules.